Replacement & Recoating
Cooper Rollers can manufacture replacement rollers or evaluate existing cores for recoating. Final manufacture should follow the confirmed installed dimensions and roller-end arrangement.
Komori Spica 29 · 429 configuration
Komori Spica 29 Roller Configuration
A commonly used roller configuration for Komori Spica 29 (429), covering inking and dampening positions. Match the listed dimensions to the installed machine before manufacture or recoating.
12 listed positions
Inking + Dampening
Dimensions in mm
Before ordering
- Confirm exact press model and nameplate details.
- Identify the roller code/position required.
- Check OD, rubber face length and total length.
- Confirm the installed V/W dampening arrangement.
- Share both roller-end/journal details when possible.
Technical specifications
Listed dimensions for a commonly used Spica 29 (429) configuration.
Fitment confirmation: Use this table as a configuration reference.
Before order release, confirm the installed roller dimensions, press identification and roller-end hardware.
| S.No. | Roller Description | Qty | Diameter Ø | Rubber Length | Total Length |
|---|---|---|---|---|---|
| 1 | Ink Form (A) | 1 | 68 | 758 | 830 |
| 2 | Ink Form (B) | 1 | 65 | 758 | 874 |
| 3 | Ink Form (C) | 1 | 61 | 758 | 830 |
| 4 | Ink Form (D) | 1 | 71 | 758 | 874 |
| 5 | Ductor (E) | 1 | 60 | 770 | 830 |
| 6 | Dist. Roller (F) | 1 | 67 | 758 | 830 |
| 7 | Dist. Roller (G) | 1 | 60 | 758 | 830 |
| 8 | Dist. Roller (H) | 1 | 74 | 758 | 796 |
| 9 | Dist. Roller (L) | 1 | 60 | 758 | 874 |
| 10 | Dist. Roller (M) | 1 | 60 | 758 | 874 |
| 11 | Dampening Form Roller (V) | 1 | 65 | 768 | 898 |
| 12 | Metering Roller (W) | 1 | 73 | 826 | 930 |
Compound Selection
Covering compound and hardness are selected after confirming the roller position, print chemistry, operating conditions and existing roller requirement.
Request a Spica 29 quotation
Send the roller code, dimensions, required quantity and photographs of the installed roller for matching.
FAQs
Is this a universal complete Spica 29 roller set?
No. The table represents a commonly used configuration. Confirm the installed press and roller arrangement before manufacture.
What should I send if my roller differs?
Send the roller code/position, OD, rubber face length, total length and clear photographs of the complete roller and both ends.
Can Cooper Rollers recoat my existing roller?
Yes, subject to inspection of the existing core, journals and dimensional condition.
