Komori Sprint 26 — Offset Rubber Rollers
Roller dimensions for Komori Sprint 26 configurations including S-26 / S-226 / S-226P. Use the table below and confirm the press nameplate and installed dampening arrangement before manufacture or recoating.
Positions Overview
Inking Unit
- A FORM
- B FORM
- C FORM
- D FORM
- E DUCTOR
- F DISTRIBUTOR
- G DISTRIBUTOR
- H DISTRIBUTOR
Dampening Unit
- V WATER FORM
- W WATER METER
Roller Dimensions & Quantities — Sprint 26
| S.No | Roller Description | Qty/pcs | Color Coding | Diameter Ø (mm) | Rubber Length (mm) | Total Length (mm) | Item Code |
|---|---|---|---|---|---|---|---|
| 1 | A FORM | 1 | — | 64.5 | 674 | 722 | — |
| 2 | B FORM | 1 | — | 70 | 674 | 766 | — |
| 3 | C FORM | 1 | — | 60 | 674 | 722 | — |
| 4 | D FORM | 1 | — | 75 | 674 | 766 | — |
| 5 | E DUCTOR | 1 | — | 60 | 674 | 740 | — |
| 6 | F DISTRIBUTOR | 2 | — | 65 | 674 | 766 | — |
| 7 | G DISTRIBUTOR | 2 | — | 60 | 674 | 766 | — |
| 8 | H DISTRIBUTOR | 1 | — | 82 | 674 | 766 | — |
| 9 | V WATER FORM | 1 | — | 65 | 678 | 736 | — |
| 10 | W WATER METER | 1 | — | 73 | 748 | 822 | — |
Please share the press nameplate or BOM with your enquiry to confirm the installed configuration before order release.
Compatibility & Variants
Compatibility
This page covers the Komori Sprint 26 family, including S-26, S-226 and S-226P. Please confirm the exact press model, nameplate and installed dampening hardware so the V Water Form and W Water Meter configuration can be matched before order release.
Notes
- Position naming: A–D Forms; E Ductor; F/G/H Distributors; V Water Form; W Water Meter.
- Quantities: Confirm required pieces against the number of printing units and installed configuration.
Compound Options & Care
Materials & Shore A
We supply NBR, PU and silicone compounds matched to your ink and fountain solution. Tell us your chemistry and we’ll recommend a Shore A range optimised for transfer and life.
- Balanced resilience to resist glazing and swelling
- Concentric grinding for clean, even laydown
- Press-ready packing & labelling by unit
Maintenance Tips
- Re-check nip settings after installation and first heat cycle
- Use compatible washes; avoid harsh solvents on NBR
- Clean after every shift; rotate idle rollers to prevent set marks
- Inspect periodically for hardness drift or glazing
Order or Request a Quote
- Share your press details: S-26 / S-226 / S-226P, number of units, and the installed dampening arrangement.
- Tell us preferred compound (NBR / PU / Silicone) or ask for a recommendation.
- Receive confirmation with pricing and lead time.
